NSN 3120-01-352-2800 · NIIN 013522800 · FSC 3120
NO DASHES 3120013522800
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.8560 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.8170 AND INCHES MAXIMUM 0.8370 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.4330 AND INCHES MAXIMUM 1.4530 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.2550 AND INCHES MAXIMUM 0.2650 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.3410 AND INCHES MAXIMUM 0.3430 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7440 AND INCHES MAXIMUM 0.8060 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 5300 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CTLM | LUBRICATION FEATURE | INTERNAL OUTER MEMBER SELF-LUBRICATING LINER |
| FEAT | SPECIAL FEATURES | KEY WAY IN SHANK |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | INTERNAL OUTER MEMBER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M81935/4-4KL | 81343 |
| AS81935 | 81343 |
| MIL-B-81935/4 | 81349 |
| M81935/4-4KL | 81349 |
| M81935/4-4KL | 0U583 |
| M81935/4-04KL | 0U583 |
| AS81935 | 0U583 |
| SAE-AS81935/4 | 0U583 |