NSN 3120-01-528-8501 · NIIN 015288501 · FSC 3120
NO DASHES 3120015288501
In Stock
BUSHING,SLEEVE
Bearings, Plain, Unmounted
Application: HYDRAULIC TESTSTAND HTB-50E
Technical characteristics
8 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | OUTSIDE FLANGE DIAMETER IS 5" AND SOME FRACTION WHICH IS NOT DETERMINABLE WITH THE TECH DATA IN POSSESION; THE OUTSIDE DIAMETER IS TAPERED WHERE THE SMALL END IN 3.8750" AND THE LARGE END IS 4.0000"; THERE IS A KEYWAY IN THE BUSHING; AND THREE CAP SCREW HOLES; AND TWO OTHER HOLES ALL AROUND THE FLANGE PORTION; THE BORE RANGE IS 1.125"- APPROXIMATELY 2.75" BUT IS A BIT UNREADABLE ON THE TECH DATA |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | V BELT SHEAVE BUSHING(MOTOR); SPLIT TAPER BUSHINGS |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 3.8750 AND INCHES MAXIMUM 4.0000 |
| AGAV | END ITEM IDENTIFICATION | HYDRAULIC TESTSTAND HTB-50E |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.8750 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.6250 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| D-4232 | 08832 |
| TB-520 | 08832 |
| D4232 ITEM-176-TB-520 | 08832 |