NSN 5305-00-281-8527 · NIIN 002818527 · FSC 5305
NO DASHES 5305002818527
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.422 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| AASK | HEAD STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC 1ST TREATMENT RESPONSE QQ--416 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6050 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6300 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.023 AND INCHES MAXIMUM 0.028 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.082 AND INCHES MAXIMUM 0.092 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
Supersedes
This item replaces cancelled NIINs 001800006 · 002735438. An older drawing citing one of those numbers resolves here.