NSN 3130-00-057-8275 · NIIN 000578275 · FSC 3130
NO DASHES 3130000578275
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES MINIMUM 4.2480 AND INCHES MAXIMUM 4.2500 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 5.1250 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 1.000 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.5000 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.7500 |
| AFWB | HOUSING DIAMETER | INCHES MINIMUM 6.1200 AND INCHES MAXIMUM 6.1250 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.4688 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.0312 |
| AKRF | SEAL TYPE | SLINGER |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | SEAL STEEL AND WOOL |