NSN 3130-00-102-4689 · NIIN 001024689 · FSC 3130
NO DASHES 3130001024689
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANJS | SHAFT END TYPE | OPEN |
| AMCL | BLOCK TYPE | FIXED |
| MATT | MATERIAL | HOUSING IRON CAST |
| FEAT | SPECIAL FEATURES | TWO 0.187 IN. HOLES THROUGH FLANGE LOCATED 180 DEG APART ON HORIZONTAL CENTER LINE 3.250IN. HOLE DISTANCE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.4375 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| MATT | MATERIAL | SEAL STEEL AND RUBBER |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 2.7500 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 3.7500 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AKRF | SEAL TYPE | LABYRINTH |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.0625 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.0000 |
| STYL | STYLE DESIGNATOR | |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.5312 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.4531 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 000056209. An older drawing citing one of those numbers resolves here.