NSN 3130-00-142-0213 · NIIN 001420213 · FSC 3130
NO DASHES 3130001420213
In Stock
BEARING UNIT,PLAIN
Bearings, Mounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.9375 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 8.2500 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.8750 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 18.0000 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 10.7500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 17.1250 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 15.5000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 20.5000 |
| AGKL | LUBRICATION FITTING TYPE | RING |
| AGNF | BASE LENGTH | INCHES NOMINAL 14.7500 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AKRF | SEAL TYPE | SLINGER |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 9.5000 |
| CBBL | FEATURES PROVIDED | REMOVABLE LINER |
| LBMA | LUBRICATION MATERIAL | OIL |
| MATT | MATERIAL | BEARING SURFACE TIN ALLOY |
| MATT | MATERIAL | HOUSING STEEL |
| MATT | MATERIAL | SEAL COPPER ALLOY |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MG29EPC1T032 | 71956 |
| MG29E1T32 | 71956 |