NSN 3130-00-159-1478 · NIIN 001591478 · FSC 3130
NO DASHES 3130001591478
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.5625 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.7500 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.2500 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.7500 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 5.0000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.6250 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 6.5625 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.0156 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.9062 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.8125 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | SEAL STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LAK1 1/4 | 21335 |
| S520M | 21335 |
| SYH11/4 WM | 52676 |
| SYH104X | 52676 |
| SYH1.1/4WF | 52676 |
| S520M | 57448 |
| SXB1-1-4 | 71956 |