NSN 3130-00-163-8555 · NIIN 001638555 · FSC 3130
NO DASHES 3130001638555
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 5.1250 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.5625 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.5156 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 6.1250 |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 3.7500 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.3437 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.7500 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING IRON CAST |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VFS2-115 | 71176 |
| VF2S-120 | 71176 |
| R10050-38 | 76727 |
| C9984-6 | 76727 |
| C-8985-3 | 76727 |
| 3130PL0832407 | 9009H |
| R10050-38 | 98523 |
| SFT20 | 02695 |
| FC2-25 1-1/4 | 0SBD3 |
Supersedes
This item replaces cancelled NIIN 008668556. An older drawing citing one of those numbers resolves here.