NSN 3130-00-184-2144 · NIIN 001842144 · FSC 3130
NO DASHES 3130001842144
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.5156 |
| ANJS | SHAFT END TYPE | OPEN |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.6250 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.6562 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 4.6250 |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.9062 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| MATT | MATERIAL | HOUSING IRON CAST |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.2500 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | SEAL STEEL |
| STYL | STYLE DESIGNATOR | |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.4688 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| F3Y220H | 19382 |
| LCJ1 1/4 | 21335 |
| LCJ1 1/4FS134 | 21335 |
| LCJ1 1-4ANG15 | 21335 |
| K01530 | 29510 |
| 7F1 1-4 | 71041 |
| K0-1530 | 76280 |
| K01530 | 76280 |