NSN 3130-00-227-2819 · NIIN 002272819 · FSC 3130
NO DASHES 3130002272819
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.0000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 5.3750 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.9375 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 2.1250 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 7.2500 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| FEAT | SPECIAL FEATURES | LOCKING PIN AND DIMPLE LOCATELUBRICATION HOLE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | OVERALL IRON CAST |
| MATT | MATERIAL | SEAL WOOL AND STEEL |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.9375 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| AMCL | BLOCK TYPE | FIXED |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.5625 |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |