NSN 3130-00-364-4088 · NIIN 003644088 · FSC 3130
NO DASHES 3130003644088
In Stock
BEARING UNIT,PLAIN
Bearings, Mounted
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.250 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.4000 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 5.2500 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.9380 |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 6.0000 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.6250 |
| AGKL | LUBRICATION FITTING TYPE | CUP |
| AGZA | ALIGNMENT TYPE | RIGID |
| ANKL | THRUST BEARING SURFACE LOCATION | BOTH ENDS |
| STYL | STYLE DESIGNATOR | |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| ANJS | SHAFT END TYPE | OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.628 AND INCHES MAXIMUM 0.629 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 4.1250 |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES MINIMUM 1.998 AND INCHES MAXIMUM 1.999 |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING STEEL |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3273504 REV-F | 55380 |
| 3273504 | 55380 |
| 3273504 | 72915 |
| K-3273504 | 18954 |
Supersedes
This item replaces cancelled NIIN 001261975. An older drawing citing one of those numbers resolves here.