NSN 3130-00-489-6349 · NIIN 004896349 · FSC 3130
NO DASHES 3130004896349
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMCL | BLOCK TYPE | FIXED |
| MATT | MATERIAL | HOUSING IRON CAST |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 3.4375 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 8.6250 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 7.3750 |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AKRF | SEAL TYPE | LABYRINTH |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING SURFACE STEEL |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.7500 |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 4.3750 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| ANJS | SHAFT END TYPE | OPEN |
| ABXV | BORE DIAMETER | INCHES NOMINAL 3.4375 |
| MATT | MATERIAL | SEAL STEEL |
| STYL | STYLE DESIGNATOR | |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 10.2500 |
| ANKF | SEAL LOCATION | BOTH ENDS |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 014605270. An older drawing citing one of those numbers resolves here.