NSN 3130-00-555-6579 · NIIN 005556579 · FSC 3130
NO DASHES 3130005556579
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 2.3750 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.4375 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 0.9375 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.3906 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.7500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 4.4062 |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.2812 |
| AKRF | SEAL TYPE | LABYRINTH |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AMCL | BLOCK TYPE | FIXED |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.5312 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | SEAL STEEL AND WOOL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| ANJS | SHAFT END TYPE | OPEN |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FC2-25-3/4 | 39317 |
| SHWD5059 PIECE 3 | 52249 |
| SFT12 | 52249 |
| SFT12 | 57448 |
| FB230-3/4 | 71176 |
| 4T 3/4 | 71041 |
| SFT12 | 02695 |
Supersedes
This item replaces cancelled NIIN 009033660. An older drawing citing one of those numbers resolves here.