NSN 3130-00-613-8540 · NIIN 006138540 · FSC 3130
NO DASHES 3130006138540
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| MATT | MATERIAL | BEARING STEEL COMP E52100 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.5312 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.7656 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.0010 AND INCHES MAXIMUM 1.0060 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.3100 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 4.5000 AND INCHES MAXIMUM 5.0300 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BEARING ASSN STD SINGLE MATERIAL RESPONSE SAE |
| STYL | STYLE DESIGNATOR | |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES MINIMUM 1.6730 AND INCHES MAXIMUM 1.6880 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.6250 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.3100 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 6.3100 |
| AGNF | BASE LENGTH | INCHES NOMINAL 1.4400 |
| MATT | MATERIAL | HOUSING STEEL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BY408194 | 19382 |
| BS223569 | 19382 |
| H20100S001PC111 | 98523 |