NSN 3130-00-879-1349 · NIIN 008791349 · FSC 3130
NO DASHES 3130008791349
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | SEAL STEEL AND WOOL |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 4.5625 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.5625 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 6.1875 |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.1562 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| MATT | MATERIAL | HOUSING IRON CAST |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.5781 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.7500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 7.4375 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANJS | SHAFT END TYPE | OPEN |
| STYL | STYLE DESIGNATOR | |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.5625 |
| ANKF | SEAL LOCATION | BOTH ENDS |