NSN 3130-00-967-2848 · NIIN 009672848 · FSC 3130
NO DASHES 3130009672848
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AKRF | SEAL TYPE | CONTACT |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.4375 |
| ANJS | SHAFT END TYPE | OPEN |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 7.1250 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.5625 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.7500 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.5000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.7500 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 5.5000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.9375 |
| MATT | MATERIAL | SEAL STEEL AND RUBBER |
| STYL | STYLE DESIGNATOR | |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| AMCL | BLOCK TYPE | FIXED |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.9375 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.1250 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006315282. An older drawing citing one of those numbers resolves here.