NSN 3130-01-025-6324 · NIIN 010256324 · FSC 3130
NO DASHES 3130010256324
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | FAHRENHEIT 175.0 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 4.5937 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.5312 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.4531 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.1875 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 5.5625 |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 3.1250 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.0000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.7500 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | COLLAR STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RCJT1 3/16E8232 | 21335 |
| PCJT1 3/16E8232 | 21335 |
| VF2E-119 | 71176 |
| FB230 1 3/16 | 71176 |
| SFT19-C | 02695 |
| KT66CZ102 | 10855 |