NSN 3130-01-124-6705 · NIIN 011246705 · FSC 3130
NO DASHES 3130011246705
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.6250 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.1875 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.2500 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.8750 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 6.9375 AND INCHES MAXIMUM 8.0625 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 5.2812 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 9.2500 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.3750 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.5000 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 2.6875 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON MALLEABLE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PB250-2-1/4 | 71176 |
| 3550-0135-001 | 84659 |
| PB250-2 1/4 | 84659 |
| 3550-0135-001 | 06032 |