NSN 3130-01-138-3339 · NIIN 011383339 · FSC 3130
NO DASHES 3130011383339
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.6250 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.1250 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.9375 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.7500 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 9.0000 AND INCHES MAXIMUM 10.0000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 6.0000 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 13.6250 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 12.0000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 7.0000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 13.6250 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 3.5000 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| FEAT | SPECIAL FEATURES | WITH TWO SINGLE ROW BALL BEARINGS AND TWO GREASE FITTINGS |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | BEARING STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 134142 | 71956 |