NSN 3130-01-143-0304 · NIIN 011430304 · FSC 3130
NO DASHES 3130011430304
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Application: AGM-86B ALCM
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | INCHES MINIMUM 1.385 AND INCHES MAXIMUM 1.395 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.174 AND INCHES MAXIMUM 0.178 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.060 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.6886 |
| AFWB | HOUSING DIAMETER | INCHES MINIMUM 2.6790 AND INCHES MAXIMUM 2.6795 |
| AFWD | HOUSING LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.121 |
| AGAV | END ITEM IDENTIFICATION | AGM-86B ALCM |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES MINIMUM 1.541 AND INCHES MAXIMUM 1.561 |
| ANJS | SHAFT END TYPE | OPEN |
| AYRZ | COUNTERSINK DIAMETER | INCHES MINIMUM 0.0619 AND INCHES MAXIMUM 0.0623 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 15.0 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED, COUNTERSUNK |
| FEAT | SPECIAL FEATURES | TEMP OF HOUSING NOT TO BE MORE THAN 300 F |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 769205-1 | 73030 |