NSN 3130-01-145-8457 · NIIN 011458457 · FSC 3130
NO DASHES 3130011458457
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.2180 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.2500 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.4400 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 3.5000 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 5.5000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 2.8200 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 7.5000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 4.0000 |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AGNF | BASE LENGTH | INCHES NOMINAL 7.5000 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 7.5000 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.5000 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | OIL |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY 6061 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TWN-20 | 96881 |
| 11501102-1 | 18876 |