NSN 3130-01-150-6022 · NIIN 011506022 · FSC 3130
NO DASHES 3130011506022
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 1.1250 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.8750 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 4.4375 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 2.5000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 17.3750 AND INCHES MAXIMUM 19.2500 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 5.0000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 13.4375 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 8.7500 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 22.0000 |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AGNF | BASE LENGTH | INCHES NOMINAL 8.2500 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 8.7500 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FLOATING |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 6.6875 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SDAF-58626 | 52676 |
| SDAFS-22626 | 52676 |