NSN 3130-01-161-5559 · NIIN 011615559 · FSC 3130
NO DASHES 3130011615559
In Stock
BEARING UNIT,PLAIN
Bearings, Mounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 1.3120 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 3.0000 AND INCHES MAXIMUM 3.0010 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.8800 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 9.2500 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 14.7500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 11.2500 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 17.5000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 12.0000 |
| AGKL | LUBRICATION FITTING TYPE | CUP |
| AGNF | BASE LENGTH | INCHES NOMINAL 17.5000 |
| AGZA | ALIGNMENT TYPE | RIGID |
| ANJS | SHAFT END TYPE | OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 8.0000 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| FEAT | SPECIAL FEATURES | TWO SEPARATE BEARING SURFACES,2.2500 IN. LG EACH |
| MATT | MATERIAL | OVERALL COPPER ALLOY 957 OR COPPER ALLOY 958 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 123-4642962 ITEM 2 | 53711 |
| 87434-2503 ITEM 2 | 96169 |