NSN 3130-01-175-7689 · NIIN 011757689 · FSC 3130
NO DASHES 3130011757689
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABGF | GROOVE WIDTH | INCHES NOMINAL 0.4500 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 2.9500 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.1563 AND INCHES MAXIMUM 0.1623 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.6750 AND INCHES MAXIMUM 2.6762 |
| AFWB | HOUSING DIAMETER | INCHES MINIMUM 3.3450 AND INCHES MAXIMUM 3.3550 |
| AFWD | HOUSING LENGTH | INCHES MINIMUM 2.2000 |
| ANJS | SHAFT END TYPE | OPEN |
| FEAT | SPECIAL FEATURES | 24 0.1563 IN. MIN DIA AND 0.1623 IN. MAX DIA HOLES ARE EQUALLY SPACED AS FOR 36 HOLES ON FRONT FACE; DISTANCE FROM FRONT FACE TO GROOVE 1.075 IN. WITH 4 THROUGH HOLES EQUALLY SPACED ON CIRCUMFERENCE 0.3750 IN. DIA; DISTANCE FROM LEFT GROOVE CORNER TO BACK FACE 0.675 IN.,3.330 IN. DIA; SECOND GROOVE 0.150 IN. FROM RIGHT CORNER OF FIRST GROOVE,0.275 IN. WIDE,0.200 IN. NOM DEPTH,4 HOLES 0.0625 IN. DIA EQUALLY SPACED ON FLANGE BETWEEN GROOVES; 8 EQUALLY SPACED 1.000 IN. DIA GROOVES,0.180 IN. DEEP ON DIAMETER OF BACK FACE; ANODIZE PER PS 13201,TYPE 2,CLASS 1 OVERALL; SURFACE ROUGHNESS 63.0 MICROINCHES OVERALL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 76301-S 21202 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 75A430630-2001 | 35962 |
| 75A430630-2001 | 76301 |
| 75A430630-2001 | K0654 |