NSN 3130-01-212-4800 · NIIN 012124800 · FSC 3130
NO DASHES 3130012124800
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.542 AND INCHES MAXIMUM 0.557 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.7500 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.750 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 4.500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.120 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 5.750 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | INCHES NOMINAL 1.376 |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.500 |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.625 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| FEAT | SPECIAL FEATURES | 32.0 MICROIN FINISH ON BORE; INTERNAL FLANGE 1.750 IN. DIA,0.136 IN. WIDE,1.157 IN. FROM FRONT FACE; REDUCED DIA BORE SAME END AS INTERNAL FLANGE TO 1.871 IN. DIA,0.207 IN. DEEP FROM BACK FACE; FOUR EQUALLY SPACED HOLES IN FROM FSACE,0.380 IN. MIN DEEP,0.250 IN. 20UNC-2B THREADS,2.124 IN. APART; 0.3138 DIA BY 0.380 IN. DEEP HOLE IN BASE |
| MATT | MATERIAL | OVERALL STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- A582 |
| SFTT | SURFACE TREATMENT | HOUSING EXCLUDING BORE PAINT |
| SFTT | SURFACE TREATMENT | BORE CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HOUSING EXCLUDING BORE MFR REF SINGLE TREATMENT RESPONSE FIND NO. 7,FSC- 49956 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BORE MFR REF SINGLE TREATMENT RESPONSE FIND NO. 4,FSC- 49956 |
| STYL | STYLE DESIGNATOR |