NSN 3130-01-226-3721 · NIIN 012263721 · FSC 3130
NO DASHES 3130012263721
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.626 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 5.0000 AND INCHES MAXIMUM 5.0010 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 6.000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 11.300 |
| AFWE | HOUSING WIDTH | INCHES MINIMUM 13.938 AND INCHES MAXIMUM 14.062 |
| AGKL | LUBRICATION FITTING TYPE | FLUSH |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 5.650 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| FEAT | SPECIAL FEATURES | COUNTERBORED APERTURE; 2 ADDITIONAL MOUNTING HOLES IN BASE; 4 EQUALLY SPACED 0.531 DIA MOUNTING HOLES ON A 6.000 DIA BOLT CIRCLE |
| MATT | MATERIAL | OVERALL STEEL COMP 304 OR STEEL COMP 1009 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-766 AND FED SPEC 2ND MATERIAL RESPONSE QQ-S-698 |