NSN 3130-01-233-9837 · NIIN 012339837 · FSC 3130
NO DASHES 3130012339837
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.766 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.063 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.7501 AND INCHES MAXIMUM 2.7507 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 2.250 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 8.125 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 6.438 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 10.438 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.563 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 3.688 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 3.250 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 30.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC AND STEEL |
| MATT | MATERIAL | COLLAR STEEL |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING IRON CAST |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 81755-C12063 |