NSN 3130-01-239-3655 · NIIN 012393655 · FSC 3130
NO DASHES 3130012393655
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.6875 AND INCHES MAXIMUM 1.6887 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.312 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 5.562 AND INCHES MAXIMUM 6.125 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 4.312 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 2.438 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 7.750 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.125 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 2.125 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 06872-9H-1-11/16 | 71041 |
| 9H-1-11/16 | 71041 |