NSN 3130-01-258-6104 · NIIN 012586104 · FSC 3130
NO DASHES 3130012586104
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.625 |
| ABVG | MOUNTING SLOT LENGTH | INCHES MINIMUM 9.875 AND INCHES MAXIMUM 11.000 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 3.0000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.625 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 10.437 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 2.000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 7.375 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 5.250 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 13.000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 4.875 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FLOATING |
| ANJS | SHAFT END TYPE | CLOSED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 3.750 |
| CBBL | FEATURES PROVIDED | DRAIN PLUG |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | HOUSING STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PKE-LB6848FHC | 19382 |
| PKELB6848FRC | 19382 |
| 301-23-46 ITEM 15 | 63952 |