NSN 3130-01-310-5853 · NIIN 013105853 · FSC 3130
NO DASHES 3130013105853
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | FAHRENHEIT -65.0 AND FAHRENHEIT 300.0 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.0000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 6.312 AND INCHES MAXIMUM 7.500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 4.969 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 2.312 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 8.875 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AMCL | BLOCK TYPE | FIXED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 2.750 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | SEAL PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | HOUSING IRON CAST |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C-35-2 | 92563 |
| A4725 | 12437 |
| SA2262 ITEM 5 | 12437 |