NSN 3130-01-318-2102 · NIIN 013182102 · FSC 3130
NO DASHES 3130013182102
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.9062 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.4375 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.4531 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.0000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 4.875 |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 2.750 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.1875 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.7812 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON MALLEABLE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | SEAL RUBBER |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RCJT1 | 21335 |
| 100010012-8 ITEM 9 | 07309 |
| 100010012-8-6 | 07309 |