NSN 3130-01-329-7764 · NIIN 013297764 · FSC 3130
NO DASHES 3130013297764
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 1.400 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 3.250 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 7.0866 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 3.250 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 20.700 AND INCHES MAXIMUM 23.600 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 4.625 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 14.938 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 9.625 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 26.700 |
| AGNF | BASE LENGTH | INCHES NOMINAL 9.100 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FLOATING |
| ANJS | SHAFT END TYPE | CLOSED OR OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 7.500 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE OR OIL LUBRICATING |
| MATT | MATERIAL | SEAL RUBBER |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5B8-03411 | 34712 |
| SAFS 22236 | 52676 |
| PKE-LB78180FRCT2 | 61412 |
| SPBFS 22236 | 71176 |
| PKE-LB78180FRCT2 | 05805 |