NSN 3130-01-350-7104 · NIIN 013507104 · FSC 3130
NO DASHES 3130013507104
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.562 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.188 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.4375 AND INCHES MAXIMUM 1.4385 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.125 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 4.688 AND INCHES MAXIMUM 5.938 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.750 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 3.000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 7.375 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 1.969 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.875 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | BEARING STEEL |
| STYL | STYLE DESIGNATOR |