NSN 3130-01-359-5716 · NIIN 013595716 · FSC 3130
NO DASHES 3130013595716
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Application: MAIN PROPULSION LINE SHAFT ONBOARD 270 FT WMEC COAST GUARD VESSELS
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 1.250 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 10.5000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 9.000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 21.000 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 5.500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 24.500 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 9.125 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 28.500 |
| AGAV | END ITEM IDENTIFICATION | MAIN PROPULSION LINE SHAFT ONBOARD 270 FT WMEC COAST GUARD VESSELS |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 9.000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FLOATING |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 12.250 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | OVERALL IRON CAST |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 01-BCP-1008-EX | 08197 |