NSN 5905-01-120-4643 · NIIN 011204643 · FSC 5905
NO DASHES 5905011204643
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.750 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0607 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.880 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.060 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.253 AND INCHES MAXIMUM 0.263 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.440 AND INCHES MAXIMUM 0.470 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.8800 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 16000.000 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.2 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.9 TO 1.9 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 98.8 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |