NSN 5990-00-925-6614 · NIIN 009256614 · FSC 5990
NO DASHES 5990009256614
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
50 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.6150 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.0990 AND INCHES MAXIMUM 3.1000 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.3550 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 190.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 2.6950 AND INCHES MAXIMUM 2.7000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 2.7490 AND INCHES MAXIMUM 2.7500 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 44.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MAXIMUM 1.20 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.7000 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSL | BODY SIZE | 31 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0030 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0300 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MAXIMUM 2.7500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 4.6250 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.2500 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3640 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MAXIMUM 4.80 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.600 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJTT | STATOR DC RESISTANCE IN OHMS | MAXIMUM 1.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.500 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 64 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 10.2 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT JAC0.125 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7300 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |