NSN 5305-00-104-5078 · NIIN 001045078 · FSC 5305
NO DASHES 5305001045078
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.250 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.969 AND INCHES MAXIMUM 4.031 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.562 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.368 AND INCHES MAXIMUM 0.375 |
| AAUM | LOCKING FEATURE | THREADS PATCH OR PELLET OR STRIP |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.316 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MATT | MATERIAL | FASTENER STEEL |
| MATT | MATERIAL | LOCKING FEATURE PLASTIC POLYAMIDE NYLON |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY LOCKING FEATURE AND THD LG |