NSN 3220-01-392-8369 · NIIN 013928369 · FSC 3220
NO DASHES 3220013928369
In Stock
SURFACER,WOODWORKING
Woodworking Machines
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 8.000 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AKYN | FURNISHED ITEMS AND QUANTITY | HIGH SPEED, HEAT TREATED TOOL STEEL KNIVES, 4; KNIFE ROUND CUTTERHEAD MOUNTED IN SEALED BALL BEARINGS, 4; CUTTERHEAD GUARD, 1; KNIFE SETTING GAUGE, 1; JACK SCREWS, 4; CUTTERHEAD PULLEY, 1; BED ROLLERS, 4 |
| APHA | OPERATING VOLTAGE IN VOLTS | MINIMUM 230.0 AND MAXIMUM 460.0 |
| ASQQ | HORSEPOWER RATING | 15.00 |
| AWZJ | POWER SOURCE | ELECTRIC MOTOR |
| BBFY | POWER FEED ROLL QUANTITY | 4 |
| BBGD | MATERIAL WIDTH ACCOMMODATED | INCHES NOMINAL 24.000 |
| BBGF | CUTTER HEAD QUANTITY | 1 |
| BBGG | CUTTER HEAD CYLINDER DIAMETER | INCHES NOMINAL 4.125 |
| BBGH | CUTTER HEAD CUTTING CIRCLE DIAMETER | INCHES NOMINAL 4.375 |
| BBGJ | CUTTER HEAD KNIFE QUANTITY | 4 |
| BBJK | CUTTER HEAD KNIFE OVERALL LENGTH | INCHES NOMINAL 24.250 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | SECTIONAL INFEED ROLLS AND CHIPBREAKER, MOTOR MOUNT BASE, 1 1/2 HP FEED DRIVE MOTOR, MOTOR PULLEY, BELTS AND BELT GUARD; 4 IN. DIAMETER FEED ROLLERS; 4 IN. DIAMETER BED ROLLERS; VARIABLE SPEED FEED RANGE 20 FPM TO 100 FPM; WEIGHT WITH MOTOR, DOMESTIC CRATED 2885 POUNDS; 24 IN. BY 48 IN. BED; RECOMMENDED CUTTERHEAD SPEED, BELTED DRIVE 4800 RPM |