NSN 3020-00-294-8645 · NIIN 002948645 · FSC 3020
NO DASHES 3020002948645
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.244 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.906 |
| CWNH | TOOTH FORM | STANDARD |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.814 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.500 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.219 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 2.561 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.875 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.125 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.750 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL IRON CAST |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.156 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.1875 |
| AJLA | TEETH QUANTITY | 102 |