NSN 9390-00-248-5537 · NIIN 002485537 · FSC 9390
NO DASHES 9390002485537
In Stock
NONMETALLIC CHANNEL
Miscellaneous Fabricated Nonmetallic Materials
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE H-S17-1527, TYE 3, CLASS 50, HUGHES AIRCRAFT CO |
| CZLZ | RIGHT-SIDE FLANGE TIP STYLE | |
| MATT | MATERIAL | RUBBER |
| AJGX | OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.135 |
| AJGY | FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | INCHES MAXIMUM 0.020 |
| BHQU | LEFT-SIDE FLANGE TIP STYLE | |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AASF | NONMETALLIC HARDNESS RATING | MINIMUM SHORE DUROMETER A 45.0 AND MAXIMUM SHORE DUROMETER A 55.0 |
| AASH | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH (PSI) 1500 |
| ABJH | TEMP RATING | FAHRENHEIT -67.0 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.620 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| ABRY | LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.620 |
| ADXK | RIGHT SIDE FLANGE HEIGHT | INCHES MINIMUM 0.387 AND INCHES MAXIMUM 0.483 |
| ADXL | LEFT SIDE FLANGE THICKNESS | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.140 |
| ADXM | RIGHT SIDE FLANGE THICKNESS | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.140 |
| ADYF | LEFT SIDE FLANGE TOP OUTER RADIUS | INCHES MAXIMUM 0.050 |
| ADYG | LEFT SIDE FLANGE TOP INNER RADIUS | INCHES MAXIMUM 0.050 |
| ADYH | RIGHT SIDE FLANGE TOP INNER RADIUS | INCHES MAXIMUM 0.050 |
| ADYJ | RIGHT SIDE FLANGE TOP OUTER RADIUS | INCHES MAXIMUM 0.050 |
| ADZC | ENVIRONMENTAL PROTECTION | TEAR AND LOW TEMPERATURE AND HIGH TEMPERATURE AND OZONE RESISTANT AND SMOG RESISTANT AND WEATHER RESISTANT |
| AJGL | FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | INCHES MAXIMUM 0.020 |
| AJGM | OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.135 |
| AJGP | BASE FLANGE THICKNESS | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.137 |