NSN 5306-00-177-5733 · NIIN 001775733 · FSC 5306
NO DASHES 5306001775733
In Stock
BOLT,SQUARE NECK
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.250 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.938 AND INCHES MAXIMUM 4.062 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 1.032 AND INCHES MAXIMUM 1.094 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| AGQB | NECK LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.281 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 13 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MAXIMUM 95.0 |
| CWXQ | NECK WIDTH | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.515 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 1 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 2,CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 OR STYLE A OR CLASS 1 |
Supersedes
This item replaces cancelled NIINs 000109142 · 000591268 · 002650805. An older drawing citing one of those numbers resolves here.