NSN 6105-01-182-7245 · NIIN 011827245 · FSC 6105
NO DASHES 6105011827245
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.375 |
| AAJU | OVERALL LENGTH | INCHES 12.375 |
| AAJV | OVERALL WIDTH | INCHES 6.375 |
| ABRR | KEYWAY WIDTH | SECOND END INCHES NOMINAL 0.120 |
| ABRV | KEYWAY DEPTH | SECOND END INCHES NOMINAL 0.070 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES NOMINAL 0.610 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES NOMINAL 0.610 |
| ABXQ | FLATTED PORTION LENGTH | FIRST END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SECOND END INCHES NOMINAL 1.875 |
| AGRB | FLAT DEPTH | FIRST END INCHES NOMINAL 0.060 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN |
| AXCP | WINDING TYPE | SHUNT WOUND |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| CBBL | FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.5000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 1.160 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 2.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | FIRST END INCHES 3.250 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.690 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW NO LOAD 1425.0 AND HIGH FULL LOAD 1725.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.190 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT LOW 3.900 OR HIGH 7.800 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 115.0 OR LINE TO NEUTRAL HIGH 230.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END FIRST STYLE A5 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SECOND STYLE A9 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | RECEPTACLE 2 |