NSN 3010-00-578-6798 · NIIN 005786798 · FSC 3010
NO DASHES 3010005786798
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 AND AMBIENT CELSIUS 40.0 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 1.600 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE LOW 110.0 OR LINE TO LINE HIGH 120.0 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| ACDC | CURRENT TYPE | INPUT AC AND DC |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.937 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 2.125 |
| AAJU | OVERALL LENGTH | INCHES 7.437 |
| AAJV | OVERALL WIDTH | INCHES 4.281 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.093 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.375 |
| AAJT | OVERALL HEIGHT | INCHES 4.093 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0833 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 29.500 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS STALLED 100.0 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |