NSN 3020-00-567-6696 · NIIN 005676696 · FSC 3020
NO DASHES 3020005676696
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 28.0000 |
| AJLA | TEETH QUANTITY | 7 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.249 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.560 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.686 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.075 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.617 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.070 |
| FEAT | SPECIAL FEATURES | COUNTERBORE 2ND END; 0.688 IN. DIA; 0.690 IN. DEEP |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.811 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.5000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.500 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 16 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.1667 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 005603077. An older drawing citing one of those numbers resolves here.