NSN 4320-01-012-4208 · NIIN 010124208 · FSC 4320
NO DASHES 4320010124208
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 38.0 OR INCH-POUNDS 140.0 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.640 AND INCHES MAXIMUM 0.650 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 12 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.354 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 1.312-12 AND 1.062-12 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 1000.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 5.000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.600 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 0.857 |
| ASAP | SPLINE PITCH | 20/40 |
| ASMM | CONNECTION QUANTITY | 2 |
| AWLS | CONNECTION TYPE | OUTLET AND INLET |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 67 DEG F TO PLUS 275 DEG F |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 0.817 |
| AXFP | DISPLACEMENT TYPE | VARIABLE |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 0.380 |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | MS33649-12 AND MS33649-16 |
| AZFG | MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. |