NSN 5935-01-011-1801 · NIIN 010111801 · FSC 5935
NO DASHES 5935010111801
In Stock
INSERT,ELECTRICAL CONNECTOR
Connectors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A AND 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.542 AND INCHES MAXIMUM 1.582 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.418 AND INCHES MAXIMUM 0.458 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | INCHES MINIMUM 1.245 AND INCHES MAXIMUM 1.255 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING STUD |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 |
| AFRN | POLARIZATION METHOD | JACKSCREW |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.320 |
| CMLP | THREAD QUANTITY PER INCH | 32 AND 40 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.138 AND INCHES 0.112 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 1 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CXCG | INCLUDED CONTACT QUANTITY | 20 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.020 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-28748 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-28748 TO 5 |
Supersedes
This item replaces cancelled NIINs 004560698 · 005028952 · 006813260 · 008065546 · 008421272 · 009469138. An older drawing citing one of those numbers resolves here.