NSN 5905-00-985-5725 · NIIN 009855725 · FSC 5905
NO DASHES 5905009855725
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| AEDX | SHAFT STYLE | |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.141 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.453 AND INCHES MAXIMUM 1.673 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.922 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.453 AND INCHES MAXIMUM 0.547 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.751 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 12.5 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 1 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
Supersedes
This item replaces cancelled NIIN 007595086. An older drawing citing one of those numbers resolves here.