NSN 9540-01-298-6998 · NIIN 012986998 · FSC 9540
NO DASHES 9540012986998
In Stock
BEAM,STRUCTURAL
Structural Shapes, Nonferrous Base Metal
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.375 |
| ABRY | LENGTH | FEET NOMINAL 16.000 |
| ADXJ | LEFT SIDE FLANGE HEIGHT | INCHES NOMINAL 1.160 |
| ADXK | RIGHT SIDE FLANGE HEIGHT | INCHES NOMINAL 1.160 |
| ADXL | LEFT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.093 |
| ADXM | RIGHT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.093 |
| AGTA | BASIC SHAPE STYLE | |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 0.750 |
| BPXF | LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 0.510 |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 0.750 |
| BPXH | RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 0.510 |
| BPXN | WEB FLANGE THICKNESS | INCHES NOMINAL 0.250 |
| CMZY | FIRST TIP STYLE | |
| CNBF | SECOND TIP INNER RADIUS | INCHES NOMINAL 0.020 |
| CNBK | SECOND TIP OUTER RADIUS | INCHES NOMINAL 0.020 |
| CNPG | THIRD TIP TAPER LENGTH | INCHES NOMINAL 0.200 |
| CNPH | FOURTH TIP TAPER LENGTH | INCHES NOMINAL 0.200 |
| CNPW | THIRD TIP THICKNESS | INCHES NOMINAL 0.063 |
| CNPX | FOURTH TIP THICKNESS | INCHES NOMINAL 0.063 |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| CNQK | SECOND TIP STYLE | |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| CNQM | THIRD TIP STYLE | |
| CNQN | FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| CNQP | FOURTH TIP STYLE | |
| CRZC | RIGHT TOP INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CSMZ | LEFT TOP INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CTBR | LEFT BOTTOM INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CWKK | RIGHT BOTTOM INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | 2ND TIP OFFSET 0.093 IN. OUTSIDE; BOTTOM FLANGES 0.080 IN. THK,13.0667 DEG TAPER TIPS; TENSILE STRENGTH 22000 PSI MIN,30000 PSI MAX; HARDNESS WEBSTER SCALE 8.0 MIN,11.0 MAX; DP MATTE FIN.; FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE,0.046 IN.; FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE,0.046 IN. |
| HEAT | HEAT TREATMENT | T-52 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 6063 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-A-200 TO 9 |
| SFTT | SURFACE TREATMENT | ANODIZE |