NSN 3405-00-240-1647 · NIIN 002401647 · FSC 3405
NO DASHES 3405002401647
In Stock
SAW,BAND,METAL CUTTING
Saws and Filing Machines
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ABFF | FURNISHED ITEMS | INTEGRAL BUTT WELDER AND INTEGRAL GRINDER |
| ACDC | CURRENT TYPE | AC |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 3 BLADES,BAND FILE,FLAT,10 FT LG,JOINED,1/4IN.,3/8IN.AND 1/2IN.WIDE;26 BLADES,BAND,RAKER TOOTH,ALL BLADES ARE0.025IN. THK,15 ARE 10FT LG AND JOINEDAND ARE OF THE FOLLOWING DIMENSIONS,3/32IN. W 18PITCH,1/8IN. W 14PITCH,1/8IN. W 24PITCH,3/16IN. W 10PITCH,1/4IN. W 10PITCH,1/4IN. W 14PITCH,1/4 IN. W 24PITCH,5/16IN. W 18PITCH,5/16IN. W 24PITCH,3/8IN. W 10PITCH,3/8IN. W 14PITCH,3/8IN. W 24PITCH,1/2IN. W 10PITCH,1/2IN. W 14PITCH,1/2IN. W 18PITCH;11 BLADES COME IN 100FT DISPENSER ROLLS AND ARE OF THE FOLLOWING DIMENSIONS,3/32IN.W 18PITCH,1/8IN. W 14PITCH,1/8IN. W 24PITCH,3/16IN. W 10PITCH,1/4IN. W 10PITCH,1/4IN. W 14PITCH,1/4IN. W 24PITCH,5/16IN. W 18PITCH,5/16IN. W 24PITCH,3/8IN. W 10PITCH,3/8IN. W 14PITCH |
| ALDF | FRAME TYPE | RIGID |
| AMSE | VOLTAGE RATING | VOLTS NOMINAL 208.0 |
| AMWX | FEED METHOD | WORK INTO CUTTING BAND |
| AMZE | ROTATIONAL SPEED RATING IN RPM | 1800.0 |
| ANCY | HORSEPOWER RATING | 0.250 |
| AQCL | THROAT DEPTH | INCHES NOMINAL 16.000 |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| ARDQ | TABLE LENGTH | INCHES NOMINAL 24.000 |
| ARDR | TABLE WIDTH | INCHES NOMINAL 24.000 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BNBB | TABLE TYPE | TILTING |
| BWLY | TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| BWLZ | TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| BWMD | FILE MAXIMUM LENGTH ACCOMMODATED | INCHES 320.000 |
| BWMF | FILE MAXIMUM WIDTH ACCOMMODATED | INCHES 0.500 |
| BWMH | BLADE MAXIMUM WIDTH ACCOMMODATED | INCHES 0.500 |
| BWML | VISE | NOT PROVIDED |
| BWMN | DISTANCE BETWEEN GUIDE AND TABLE | INCHES NOMINAL 10.000 |
| BWMZ | CUTTING SPEED RANGE | FEET PER MINUTE 50.0 TO 1500.0 |
| CBBL | FEATURES PROVIDED | POWER FEED |
| FAAZ | PHASE | SINGLE OR THREE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILS13908SIZE1 | 81349 |
| ML | 18056 |
| 2012-2 | 18056 |