NSN 3405-00-542-1328 · NIIN 005421328 · FSC 3405
NO DASHES 3405005421328
In Stock
SAW,BAND,METAL CUTTING
Saws and Filing Machines
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BWLZ | TABLE LEFT TILT ANGLE IN DEG | 5.000 |
| BNBB | TABLE TYPE | TILTING |
| BWLY | TABLE RIGHT TILT ANGLE IN DEG | 45.000 |
| ARDR | TABLE WIDTH | INCHES NOMINAL 26.000 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| ARDQ | TABLE LENGTH | INCHES NOMINAL 26.000 |
| AQCL | THROAT DEPTH | INCHES NOMINAL 26.000 |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| AMSE | VOLTAGE RATING | VOLTS NOMINAL 220.0 OR VOLTS NOMINAL 440.0 |
| AMWX | FEED METHOD | WORK INTO CUTTING BAND |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | GUIDES,SAW BLADE,W/BALL BEARING BACK-UP ROLLER FOR 1/8,3/16,1/4,3/8,1/2AND 3/4 IN.W BLADES,1 SET;JAW,WORKHOLDING,LIGHT,TABLE,SHIELDED,PENCIL,ETCHING,RIP FENCE,POLISHING BAND ATTACHMENT,1;SPECIAL HAND TOOLS,1 SET;FELT WHEEL LUBRICATOR OR MIST COOLANT,1;BAND SPEED AND TENSION INDICATOR DIALS,1;METAL CUTTING,CARBON BAND SAW BLADES 1/4,1/2,3/4 IN.,1 EA;CHART OR SELECTOR DIAL WHICH SHALL INDICATE THE RECOMMENDED CUTTING,FILING,FRICTION SAWING,GRINDING,POLISHING,AND HIGH SPEED SAWING SPEEDSIN SURFACE FEET PER MINUTE FOR VARIOUSMATERIALS,THE CHART OR SELECTOR DIAL SHALL ALSO PROVIDE THE RECOMMENDED TYPETOOTH PITCH;CARBON,1 SET;HIGH SPEED STEEL SAW BLADES,1 SET,FOR VARIOUS THICKNESS OF PLASTICS,WOOD,AND FERROUS AND NON-FERROUS METAL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE 26 |
| BWMZ | CUTTING SPEED RANGE | FEET PER MINUTE 50.0 TO 4000.0 |
| CBBL | FEATURES PROVIDED | INFINITE CUTTING SPEED AND POWER FEED |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | ABRASIVE BANDS,NO.50,80,150 ALUMINUM OXIDE,1 IN.W 12;ADAPTER,SAW BLADE GUIDE,90 DEG ANGLE,1;BELT DRIVE,1 SET;BLADE,BAND SAW,FLEXIBLE BACK,CONVENTIONAL TOOTH,RAKER,1 SET;100 FT COILS,IN ACCORDANCE W/GGG-B-421,TYPE 1,STYLE 1,1/8 IN. W,0.025 IN.THK,1;PITCH,14,18,24;COIL,1/4 IN.W,0.025 IN.THK,1;PITCH,10,18,24;COIL,1/2 IN.W,0.025 IN.THK,1;PITCH,6,10;COIL,3/4 IN.W.0.032 IN.THK,1;PTICH,6,10;COIL,BLADE,BAND SAW,FLEXIBLE BACK,SKIP TOOTH,100 FT COILS IN ACCORDANCE W/GGG-B-421,TYPE 1,STYLE 2,1/4IN.W,0.025 IN.THK,1;PITCH,6;COIL,1/2 IN.W,0.025 IN THK,1;PITCH,4;COIL,3/4 INW,0.032 IN. THK,1;PITCH,3;COIL,CIRCLE CUTTING ATTACHMENT,1;CUT-OFF-MITRE ATTACHMENT,FILE BAND,FLAT BASTARD,MEDIUM CUT,1/4 IN.W,1;FILE BAND,FLAT BASTARD,MEDIUM CUT,1/2 IN.W,1;FILE BAND,OVAL BASTARD,MEDIUM CUT,1/4&1/2 IN.W,1;FILE BAND,FLAT BASTARD,MEDIUM CUT,3/8 IN.W,1;FILE BAND,OVAL BASTARD,MED.CUT,3/8 IN.W,1;GUIDES,ABRASIVE BAND,FOR 1 IN.W BAND,1 SET;GUIDES,FILE BAND,FOR 1/4,3/8,1/2 IN.W BAND,1 SET |
| ALDF | FRAME TYPE | RIGID |
| BWMF | FILE MAXIMUM WIDTH ACCOMMODATED | INCHES 0.500 |
| BWMH | BLADE MAXIMUM WIDTH ACCOMMODATED | INCHES 1.000 |
| BWML | VISE | NOT PROVIDED |
| BWMN | DISTANCE BETWEEN GUIDE AND TABLE | INCHES NOMINAL 12.000 |
| ANCY | HORSEPOWER RATING | 3.000 |
| AAXX | MOUNTING TYPE | FLOOR |
| ABFF | FURNISHED ITEMS | INTEGRAL BUTT WELDER AND INTEGRAL GRINDER |
| ACDC | CURRENT TYPE | AC |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILS13908 | 81349 |
| 3405-2252-2412 | 99998 |